• 为您提供卷板机等产品。

新闻咨询

Great news
点击在线留言

联系人:张经理

手机:18637302099

邮箱:1311043454@qq.com

地址:新乡市牧野工业园区

数控卷板机的正确操作规范

发布时间:2016-05-05  文章来源:admin 点击次数:


数控卷板机厂家提醒卷板机正确操作规范
CNC bending machine bending machine of professional manufacturers to remind the corrective action.
数控卷板机
1、机器的操作人员应经过必要的培训,熟悉结构,性能,机器的操作方法。
1, the operator of the machine should be necessary training, familiar with the structure, performance, the method of operation of the machine.
2、通过填充油润滑图表和要求检查动力系统和机械系统工作可靠。
2, through the filling oil lubrication chart and requirements to check the power system and mechanical system work safety and reliability.
3、当开启时,应检查大齿轮的旋转方向是否符合箭头方向,脚踏开关后,确认正常运行。
3, when the open, should check whether the rotation direction of the big gear is in the direction of the arrow, after the foot switch, to confirm the normal operation.
4、机器必须在停车时进行调整。
4, the machine must be adjusted in the parking.
5、当身体任何部位可能无法在禁区内碰到他的床体积。
5, when any part of the body may not be encountered in the restricted area of his bed volume.
6、轧辊材料不得切太厚,以免损坏机器或刀片。
6, roll material should not be too thick, so as not to damage the machine or blade.
7、在弯曲过程中的工作,如果您有任何异常情况,应立即停止工作,切断电源,找人了解的原因,可继续使用后故障排除。
7, in the bending process of the work, if you have any abnormal situation, should immediately stop working, cut off the power supply, to find people to understand the reasons, can continue to use after troubleshooting.
   8、下班后应切断电源,清洗机,将刀片指南和加注润滑油。
8, after work should be cut off the power supply, cleaning machine, blade guide and lubricating oil.
数控卷板机
数控卷板机工作效率做了以下总结:
CNC bending machine work efficiency made the following summary:
1、检查卷板机和各连接螺丝是否松动、皮带松紧度是否正常。
1, check the machine and the connecting screws are loose, belt tightness is normal.
2、工作中定时清理卷板机接合部位落下的物料。
Regular cleaning machine joint material falling 2, work.
3、检查卷板机是否走偏,接头连接是否完好,应及时调正修理。
3, check whether machine go astray, connection is in good condition, should be timely adjusted repair.
4、夜间炉火没有全清除、灭掉,必须有人值班,预防炉火着起来毁坏设备。
The 4 night, the fire not clear, exterminate, there must be someone on duty, to prevent the fire burning destroy equipment.
5、机修工应及时给各部件加黄油、机油,定时检查各机器是否有异常声音,如发现及时处理,定期检查各零件是否缺少,如发现缺少,及时补上。
5, the mechanic should be timely to each component with butter, oil, regularly check the machine if there is abnormal sound, such as the discovery of timely treatment, regular inspection of the parts is missing, if found missing, supplement in time.

以上的就是数控卷板机的正确操作


  • 一键拨号
  • message
    短信咨询
  • map
    查看地图